«
»

Woot – a working VoIP config !

Been playing with my new Sipura 3000 voip adaptor for the last few days …

Until today though, I could only get either VoIP outbound or PSTN outbound to work, what I’d wanted to do was get it configured so that if I dial normally – I get a regular PSTN call, but if I dial a prefix (9), I get a VoIP call …

(999< :@gw0>|112< :@gw0>|<9:>x.|[0-8]x.< :@gw0>)

Is the dial-plan that worked !

What it means is:
Route calls to 999 (or 112) to gw0 (the PSTN interface), ditto any other calls beginning with the numbers 0 through 8

Any call with an initial digit of 9 has the 9 dropped, and is routed over VoIP

This entry was posted on Tuesday, September 27th, 2005 at 20:48 and is filed under General. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “Woot – a working VoIP config !”

  1. PHOTONIC says:
    Sunday, October 16th, 2005 at 13:32

    Hello Pron glad to see you got your 3000 working you might want to look at the vonage pap2 units as well. I have tried both now and the pap2’s seem to have better voice quality. PS. don’t mention Mr. Bush Wolf might be listening!

Leave a Reply